Introduction
The wind/solar hybrid controller is control device which can control wind turbine and solar panel at the same time and transform wind and solar energy into electricity then store to the battery bank. Wind/solar hybrid controller is the most important part in off-grid system, whose performance has much effect on life expectancy and operational stability of the whole system,especially the battery expectancy.Or life span of battery will be shortened by overcharge or overdischarge.
Features
- ·Superior military-grade components to ensure the product stability.
- ·Perfect protection function, thus the system has higher reliability.
- ·Check and set all operation parameters as requirement from LCD display.
- ·Voltage limiting and current-limiting charge mode ensures battery in the best charging status.
- ·PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status.
Certification
- ·Utility model patent of anti-strong-wind, stepless unload wind power controller
- ·Utility model patent for integration of rectification and unload in wind power main circuit board.
- ·European CE certification.
Technique Data
Product Model
|
WWS06-48-B00
|
Rated Battery Voltage
|
48V
|
Rated Wind Turbine Input Power
|
600W
|
Maximum Wind Turbine Input Power
|
900W
|
Wind Turbine
Brake Current
|
13A
|
Rated Solar Input Power
|
300W
|
Charge Shutoff Voltage
|
58V
|
Charge Recovery Voltage
|
52.8V
|
Display Mode
|
LCD
|
Quiescent Current
|
≤20mA
|
Ambient Temperature & Humidity
|
-20~+55℃/35~85%RH(Without Condensation)
|
Communication Mode (Optional)
|
RS232、RS485、RJ45、GPRS (optional)
|
Display Content
|
Battery Voltage, Wind Turbine Voltage, PV Voltage,Wind Turbine Current,PV Current, Wind Turbine Power, PV Power, Over Voltage
|
Protection Function
|
Solar reverse charge protection , Solar reverse connection protection,
Battery over charge protection, Battery reverse connection protection,
Lightning protection, Wind turbine current limiting, Wind turbine automatic brake and manual brake.
|
Temperature Compensation Function (Optional)
|
-4mV/℃/2V ,–35℃--+80℃ ,Precison:±1℃
|
Dimension
(L x W x H)
|
205×150×82mm
|
Net Weight
|
2.2 kg
|
Optional Function
OPTIONAL FUNCTIONS OPTIONAL ACCESSORIES
·Temperature compensation function | ·Ethernet communication module |
·Wind turbine low voltage charge function | ·GPRS communication module |
·RS communication function | ·SD storage card |
·By-pass function | ·RS485-USB converter |
·SD card function | ·RS485-RS232 converter |
·Wind speed detection function | ·RS232-USB converter |
·Wind turbine rotate speed detection function | |
·Wind turbine micro current charge function |